5-Layers Sintered Stainless Steel Mesh With Fine Woven Wire Mesh
5-Layers sintered stainless steel mesh
is our standard sintered mesh structure. A single layer of fine woven wire mesh is placed between two layers of coarser square woven meshes, which is then added to two layers of a strong Dutch woven wire mesh and sintered together to form a strong plate. The single layer of fine woven wire mesh acts as the filtration layer, and can be customized to meet a particular filtration rating, ranging from 5 micron to 300 microns. It can then be cut and fabricated into various discs, tubes, filter cartridges, and flat panels.
filter Material for sintered mesh
AISI304；AISI304L; AISI316；AISI316L >> check chemical component
Special Alloy Steel Hastelloy ,Monel ,Inconel & Titanium are acceptable base on customer's requirement
filter Dimension
Standard size: 500x1000mm ,600x1200mm and 1000x1000mm,1200x1200mm, and other dimensions in between are also available.
filter Technical Expression
Initial bubble-point pressure
A bubble the minimum pressure required to force the gas through the liquid impregnated porous material, Pa.
Average pore size
The average pore diameter determined by the bubble principle, in units of μm.
Relative permeability coefficient
Unit differential pressure, fluid volume flow through the filter elements per unit area in units of L/min.cm2.Pa
Viscous permeability coefficient
The unit of dynamic viscosity of the fluid when the fluid resistance is only formed by the viscous losses, the unit pressure gradient, volume flow through the filter elements per unit area in units of m2.
The Structural Drawing of Type A Sintered Wire Mesh
Type A Sintered Wire Mesh Technical Data
| Model | Nominal Filter Rating (u) | Structure | Air permeability (L/min/cm²) | Bubble Pressure (mmH2O) |
| A5-1 | 1 | 100+400X2800+100+12X64+64X12 | 1.81 | 360-600 |
| A5-2 | 2 | 100+325X2300+100+12X64+64X12 | 2.35 | 300-590 |
| A5-5 | 5 | 100+200X1400+100+12X64+64X12 | 2.42 | 260-550 |
| A5-10 | 10 | 100+165X1400+100+12X64+64X12 | 3.00 | 220-500 |
| A5-15 | 15 | 100+165X1200+100+12X64+64X12 | 3.41 | 200-480 |
| A5-20 | 20 | 100+165X800+100+12X64+64X12 | 4.50 | 170-450 |
| A5-25 | 25 | 100+165X600+100+12X64+64X12 | 6.12 | 150-410 |
| A5-30 | 30 | 100+450+100+12X64+64X12 | 1.7 | 120-390 |
| A5-40 | 40 | 100+325+100+12X64+64X12 | 6.86 | 100-350 |
| A5-50 | 50 | 100+250+100+12X64+64X12 | 8.41 | 90-300 |
| A5-75 | 75 | 100+200+100+12X64+64X12 | 8.7 | 80-250 |
| A5-100 | 100 | 100+150+100+12X64+64X12 | 9.1 | 70-190 |
| Thickness: 1.7(mm); Porosity : 37%；Weight kg/m²: 5-layer sintered wire mesh (8.4) 6-layer sintered wire mesh (14.4) |
.
Note: The 6-layer sintered wire mesh is to add one layer of 12 mesh to the 5-layer sintered wire mesh. Its thickness is 3.5mm. And it has the higher anti-pressure ability
Application of Type A Sintered Wire Mesh
1. Cylindrical Filter Element
It is widely applied in the filtration of liquid and gas. And it is applied in many industries, such as petrifaction, polyester, pharmacy, food and beverage and water treatment.
Moreover, the minimum diameter we can process can be up to 10mm and the filter rating can be up to 1micron.
In addition, as to the connection type and specification, we can produce it to the customer's request.
2. Filter Disc
It is mainly applied in drying and filtration in the pharmacy industry. The minimum diameter we can process can be up to 3000mm.And we can process it in split and integral type.
3. Catcher
It is mainly applied in pharmacy industry. It is used to intercept the powder particle in the dry gas and reduce the loss of the powder and air pollution.
In addition, because of the structure of the double tubes, it can increase the filter area in maximum.
Product Tags:
|
|
5 Layers Sintered Stainless Steel 500x1000mm Fine Woven Wire Mesh Images
|
